support@tooltra.com
📦 Free Shipping & 30-Day Hassle-Free Returns

12V Parasitic Battery Drain Tester

Skip to content

12V parasitic battery drain tester

Battery dead again?
Find the drain.

Check what’s drawing power while your vehicle is parked. See battery voltage and current together so you can narrow down the circuit before replacing parts.

$44.99 $49.99

Shop the tester

For compatible 12V vehicle systems.

A gloved hand holding Tooltra’s digital tester under the hood, with voltage and current visible on the display.
Close-up of the tester’s red voltage and blue amperage readouts beside the battery.

Two readings. One display.

See what’s still pulling power.

A charged battery that goes flat after the vehicle sits is a reason to check for key-off draw. This tester gives you a current reading to work from.

Read volts and amps together
The dual digital display shows battery voltage and current as you test.
Watch the reading change
A noticeable drop in current can point you to a circuit worth inspecting.
Keep your setup simple
Insulated spring-loaded clamps and a built-in meter handle basic draw checks without setting up a separate multimeter.

How it works

From dead battery to a suspect circuit.

Test with the engine off. Keep headlights, blowers and other high-current accessories off while the tester is connected.

  1. Let the vehicle go to sleep

    Switch off the ignition and accessories. Allow the vehicle’s modules to enter sleep mode.

  2. Connect and take a reading

    Use the supplied tester instructions and your vehicle’s service procedure. Compare the resting draw with the vehicle’s specification.

  3. Narrow down the circuit

    Follow the vehicle’s diagnostic procedure and watch for a drop in current as you isolate circuits.

Digital draw tester beside an automotive fuse box during circuit troubleshooting.

Compatibility and kit

Built for 12V diagnostics.

Use it for key-off draw checks on compatible 12V cars, pickups, SUVs, motorcycles and RVs. Verify your vehicle’s system voltage before purchasing.

System
Compatible 12V DC vehicle systems
Display
Dual readout for DC voltage and current
In the box
Battery drain tester with leads and clamps, plus a user manual
The compact digital tester with red and black clamps, leads and spring clip.

Before you buy

Common questions.

Need help checking compatibility? Email Tooltra support.

Will it tell me which part is faulty?

It shows how much current the vehicle draws. A drop during circuit isolation can narrow your search to a suspect circuit. You can then inspect the parts on that circuit.

How long should I wait before reading the tester?

Let the vehicle’s modules enter sleep mode first. On some vehicles this takes 10–45 minutes or longer. Check the vehicle manufacturer’s procedure for timing and normal standby current.

Do I need a separate multimeter?

The tester has a built-in display for both DC voltage and current, so it can handle basic parasitic-draw checks on its own.

What are the shipping and return terms?

Tooltra offers free tracked shipping with an estimated delivery time of 6–12 business days. Eligible unused items can be returned within 30 days of delivery. See the shipping policy and refund policy for details.

Check the draw before you swap parts.

Tooltra 12V Parasitic Battery Drain Tester

What are you looking for?